Responsibilities

• Designing, simulating and verifying the algorithms for radar signal processing;
• Optimizing algorithms based on analog and digital design and assisting digital actualization of the algorithms;
• Participating in the design of radar system firmware.

Requirements

• PhD or master students majoring in Communications Engineering or Electric Engineering;
• Proficient in digital signal processing;
• Skilled in C++/Python;
• Familiarity with radar signal processing;
• Knowledge of the development of embedded micro-processing software;
• Knowledge of RTL design.
• At least 3 days a week for 6 months or longer.

Responsibilities

• Designing and implementing CMOS key transceiver blocks;
• Performing simulation and participating in layout and testing of the transceiver IC;
• Being able to work in a team and meet scheduled deadlines.

Requirements

• PhD or master students majoring in Microelectronics;
• Solid understanding in basic analog;
• Solid experience in analog-related design, such as for various data converters (ADC/DAC), VGA, electric filter and PLL;
• Basic IC layout skill is a must;
• Testing/debugging knowledge to devise test plans and design of high testability;
• Ability to do behavior modelling using Matlab, Simulink or Verilog;
• At least 3 days a week for 6 months or longer.

Responsibilities

• Architecting and designing mmWave circuits such as PA/LNA/Mixer/Driver/Frequency Multiplier/VCO in advanced CMOS process nodes for various sensing applications;
• Designing and modeling of mmWave passive structures including inductors, transformers, transmission lines in advanced CMOS nodes;
• Performing highly accurate mmWave circuit measurements using probe station and other high frequency instruments.

Requirements

• PhD or master students majoring in Microelectronics;
• Solid understanding in analog/RF circuit design in CMOS technology;
• Familiarity with EM simulators, such as HFSS/Peakview/EMX;
• Familiarity with high frequency measurement instruments, such as VNA/Spectrum Analyzer/Probe Stations;
• Basic IC layout skill is a must;
• High frequency chip production experience will be an asset.
• At least 3 days a week for 6 months or longer.

Responsibilities

• Writing verification-related documents based on design manual and product definitions;
• Architecting IP verification environments and transplanting SoC environments;
• Analyzing coverage and completing verification closure;
• Doing pre- and post-synthesis simulation of IP modules and bug tracking;
• Supporting FPGA verification and chip testing.

Requirements

• PhD or master students majoring in Communications Engineering, Electronics or Microelectronics;
• Solid basic knowledge of digital circuits;
• Knowledge of ASIC design process;
• Familiarity with Verilog and SystemVerilog;
• Familiarity with Linux and EDA preferred;
• Familiarity with Python and Perl preferred;
• Familiarity with UVM preferred;
• At least 3 days a week for 6 months or longer.

Responsibilities

• According to SoC chips’ specifications, completing IP modules with regard to:

1. Writing and maintenance of design specifications;
2. Designing and maintenance of RTL code;
3. Integration on SoC chips.

• Functional verification of RTL code;
• Supporting digital verification, FPGA verification and chip testing.

Requirements

• PhD or master students majoring in Communications Engineering, Automation Control, Electronics or Microelectronics;
• Solid basic knowledge of digital circuits;
• Knowledge of ASIC design process and FPGA design process;
• Knowledge of wireless communication and radar systems preferred;
• At least 3 days a week for 6 months or longer.

Responsibilities

• Based on C language/Matlab design, completing IP modules of radar baseband with regard to:

1. Writing and maintenance of design specifications;
2. RTL code design and functional verification.

• Optimizing RTL code to meet the requirements of timing closure;
• Getting to know the functions and performance of Calterah RF/mmWave products, and working with hardware & system team to develop an integral solution for baseband signal processing.

Requirements

• PhD or master students majoring in Communications Engineering, Electronics or Microelectronics;
• Solid basic knowledge of digital circuits and digital signal processing;
• Familiarity with wireless communication and radar systems preferred;
• At least 3 days a week for 6 months or longer.

Responsibilities

• Daily administration of the office:

1. Promoting and implementing company rules and activities;
2. Coordinating all services, assistance and communication required by other internal departments;
3. Maintaining and managing all office facilities and equipment;
4. Receiving visitors and maintaining shared office environment;
5. Organizing and engaging employees in benefit or group activities;
6. Assisting in external liaison.

• Assisting in HR work:

1. Handling on-boarding and leave procedures, and attendance check of employees;
2. Releasing recruitment information and communicating with relevant hiring channels;
3. Assisting in job interviews;
4. Updating basic employee information such as the employee list.

• Others:

1. Ad hoc tasks assigned by superiors;
2. Communication within the department;
3. Cross-department coordination.

Requirements

• Students majoring in Human Resources or Administration Management;
• Skilled in MS Office;
• Outgoing, easy-going, communicative and resilient;
• A person of action, passionate about HR & Administration work with own understanding of the job.
• At least 3 days a week for 6 months or longer.

【工作职责】

1.完成雷达信号处理算法的设计、仿真和验证；

2.根据模拟设计和数字设计优化算法，协助完成算法的数字实现；

3.参与雷达系统固件设计。

【岗位要求】

1.通信、电子工程等相关领域在读硕士生、博士生；

2.熟悉数字信号处理；

3.熟练使用C++/Python；

4.了解雷达信号处理；

5.了解嵌入式微处理软件开发；

6.了解RTL设计。

【实习要求】

每周需保证3天以上实习时间，实习期至少6个月。

【工作职责】

1.负责设计和实施CMOS核心收发模块；

2.进行仿真，并参与收发芯片的布局布线和测试工作；

3.能适应团队工作，高效及时的完成工作任务。

【岗位要求】

1.微电子相关领域硕士在读硕士生、博士生；

2.对基础的模拟知识有扎实的理解；

3.在模拟方面有设计经验，如各种数据转换器（ADC/DAC），增益放大器，滤波器，锁相环等

4.具备基本的芯片布局布线能力

5.具备测试调试知识，制定测试计划，设计可测性强的测试方案；

6.使用Matlab、Simulink 或Verilog进行行为建模。

【实习要求】

每周需保证3天以上实习时间，实习期至少6个月。

【工作职责】

1.为多种传感应用制定和设计毫米波电路，如高级CMOS节点的功率放大器、低噪声放大器、混合器、驱动器、倍频器、电压控制振荡器；

2.高级CMOS节点的被动毫米波设计，包括电感、变压器以及传输线；

3.使用基台和其他高频仪器，进行高精度毫米波电路测量；

【岗位要求】

1.微电子相关领域在读硕士生、博士生；

2.对CMOS工艺的模拟、射频电路设计有扎实的理解；

3.了解EM仿真器，如HFSS/Peakview/EMX；

4.了解高频测量工具，如VNA/Spectrum Analyzer/Probe Stations；

5.具备基本的芯片布局布线能力；

6.有高频段芯片设计生产经验佳。

【实习要求】

每周需保证3天以上实习时间，实习期至少6个月。